DM-16 16-Channel 433MHz Flash Trigger With AC-Powered Receiver Set

The GODOX DM-16 Trigger and Receiver Set is a 16-channel 433MHz radio flash trigger that can be used with virtually any mains-powered studio strobe flash on the market. The Trigger/Transmitter features a universal single-pin hotshoe, which makes it compatible with virtually any camera that has a hot shoe, including most DSLRs, Mirrorless, and some high-end point-and-shoot cameras. The receiver uses an IEC320 pass-through system enabling it to be powered by the same IEC320 cable (sometimes known as a kettle lead) that powers your flash head. simply plug the receiver into your flash's power cable port, and then insert the mains power cable into the IEC320 connector on your trigger, and you're ready to go. 

Line-Of-Sight Not Required

Since the DM-16 trigger and receiver set works using radio signals, it does not require direct line-of-sight as the older optical and infrared flash triggers did. This enables you to position your flashes behind walls and use them in bright sunlight, while still being able to trigger your flashes. This opens up a whole new world of possibilities for your photography projects.

Universal Single-Pin Hotshoe

The DM-16 Trigger uses a universal single-pin hot shoe connection, meaning it is compatible with virtually any camera with a hot shoe.

16 Selectable Channels

The DM-16 Trigger and Receiver set features 16 selectable channels. To sync your trigger with your flash, simply set them both to the same channel using the white dipswitches located at the face of the trigger, and youre ready to go.  

AC-Powered Receiver

DM-16 Receiver features an IEC320 pass-through, making it mains powered. This means that you don't have to worry about running out of batteries in the middle of a shoot.  Simply insert the DM-16 Receiver's IEC320  plug into the back of your light, and then plug the Mains power cable into the IEC320 socket on the receiver, and you're ready to go.

The Godox DM-16 Trigger and Receiver set is a perfect solution for photographers who are using third-party studio strobes, and need a simple no-frills wireless trigger system to fire them without having to resort to using cumbersome sync-cables or unreliable infrared triggers. 

PLEASE NOTE: This trigger and receiver are NOT compatible with the GODOX 2.4GHz X-Series Triggers and receivers.

PLEASE NOTE: Some entry-level Canon DSLRs such as the EOS250D, 2000D, and 4000D lack the centre-pin contact that this trigger requires to work.