PRO ST-III T 2.4GHz Radio-Controlled Flash Trigger (X1T) - CLEARANCE

The Pixapro PRO ST-III T equivalent to Godox's X1 TTL is a 2.4GHz high-speed sync flash trigger system capable of transmitting TTL information between your camera and compatible flashes.

100m Transmission Range 

The Pixapro Pro ST-III T wireless flash trigger has a transmission range of approximately 100m in an open area, and since the transmitter and receivers use radio waves as opposed to Infra-red, you dont need a direct line of sight and is not affected by bright Sunlight which can sometimes cause problems with optical slave systems.

5 Individual Group Options

As well as the traditional A: B C ratio style interface, the Pixapro Pro ST-III T also has a full GR Group style interface allowing up to 5 Groups to be individually set to either TTL, Manual, or Off.

Option To Mix TTL & Manual 

You also have the ability to mix TTL and Manual Groups if needed, which makes the PRO ST-III system very versatile.

32 Separate Channels 

The PixaPro ST-III T wireless flash trigger system also has 32 separate channels, which enable you to use your ST-III trigger system in the vicinity of other photographers, without fear of accidentally triggering each others lights.

Supports TTL, HSS & Pre-sync

The PixaPro PRO ST-III radio flash trigger supports TTL, HSS (High-Speed Sync) and even has an HSS Pre-sync Timing Adjustment feature, which is great for those times when you need to increase your shutter speed beyond your cameras sync speed.

Micro USB Port

It also has a Micro USB port to enable you to update the ST-IIIs Firmware as new technologies become available.

The perfect solution for the busy photographer who requires a reliable TTL radio trigger system.

PLEASE NOTE: ST-III Trigger is designed for use with the CITI600, Hybrid360 TTL, PIKA200 TTL and STORM II 600 Flashes which have built-in ST-III receivers. Use with other flashes requires a separate receiver. 

Trigger Compatibility

Having trouble syncing your trigger to your PiXAPRO or Godox flash? Check out our YouTube playlist and see if we have a guide for how to sync your flash.

Please Note: PiXAPRO Flash and Triggering Systems are fully compatible with Godox 2.4GHz Triggers, which will allow you to mix both Godox and PiXAPRO Equipment together without issue.

PLEASE NOTE: The AD-E1 Adapter from Canon is required for use with the Canon EOS R50, as its hotshoe lacks the necessary contact pins.

Please note that this product is subject to a strict inspection upon return, and any marks, scratches, missing or damaged inner packaging, protective plastic or accessories will invalidate this item for refund, or may result in a deduction of up to 50% from the refund total. Please refer to our returns policy for more information at https://www.essentialphoto.co.uk/pages/returns-and-refunds